Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Sheepshead Bay Homeowners
Leaky ducts waste the air you’re paying to heat and cool, and in Sheepshead Bay’s mix of pre-war apartment walk-ups and mid-century brick houses, the ductwork hidden behind walls and above ceilings is often older than the people living over it. Disconnected flex runs, cracked joints, and tape that dried out decades ago push conditioned air into crawl spaces and closets instead of your rooms. Our technicians have up to 9 years of experience finding and fixing exactly that, using Rotobrush and Nikro mechanical systems to work the duct interior rather than guessing from the register.

We treat the whole air pathway, which means the repair and the cleaning happen under one appointment with one price agreed in writing before anything starts. If you’re seeing dust plumes at the vents or noticing a room that never gets comfortable, call (866) 937-8180. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Duct repair and sealing closes leaks that bleed heated and cooled air before it reaches your rooms.
- We handle metal and flex duct, insulation, mastic sealing, and air leak repair in one visit.
- One flat price per system is agreed before work begins, with before-and-after photos of your own ducts.
- The local pro we connect you with is licensed and insured as their state requires.
What Our Duct Repair & Sealing Service Includes
Duct Sealing
Duct sealing closes the gaps at joints, seams, and connections where conditioned air escapes into wall cavities and unconditioned space. You need it when rooms stay stuffy while the system runs constantly, or when your energy bill climbs without an obvious reason. We seal accessible joints with mastic and mesh rather than relying on pressure-sensitive tape, which fails as it ages and dries out in a heated chase.

Flex Duct Repair
Flex duct is the corrugated silver run you’ll find feeding registers in most Sheepshead Bay homes built or renovated after the 1960s. It kinks, sags, tears at the collar, and separates at the boot, and any of those turns a straight run into a choked one. We re-stretch sagging runs, reattach and seal collars, and replace torn sections rather than wrapping tape over a failing connection.

Metal Duct Repair
Sheet metal trunk lines and rectangular runs develop popped seams, dented sections, and separated joints over time, especially where vibration works fasteners loose. When a trunk leaks, every branch downstream loses pressure. We reseal seams, secure loose sections, and correct crushed or disconnected fittings so the trunk delivers the static pressure the system was designed for.

Duct Insulation
Bare or degraded duct insulation lets conditioned air lose its temperature before it ever reaches a room, and it invites condensation on cold surfaces. You’ll notice it as a duct that sweats in summer or a run that feels cool to the touch when the heat is on. We replace torn or compressed insulation and wrap exposed runs so the air arrives at the register at the temperature it left the unit.
Mastic Sealant
Mastic is a brush-applied sealing compound that bonds to metal and stays flexible, which is why it outlasts tape at every joint and seam. We use it on accessible trunk connections, plenum edges, and boot collars where a mechanical seal is required. Applied properly, it seals the joint permanently instead of holding until the adhesive gives out.
Air Leak Repair
Air leak repair is the diagnostic side of the job: finding where the system is losing pressure before deciding what to fix. We check accessible runs, plenums, and connections, then trace the leaks that actually matter to your comfort and your bill. Not every leak is worth chasing into a finished wall, and we’ll tell you which ones are.
Because we handle the full air pathway, the repair work connects cleanly to our air duct cleaning Sheepshead Bay service, so debris dislodged during repair gets captured rather than left to resettle.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
We work with Honeywell and Aprilaire filtration and humidity equipment, which matters more than it sounds when ducts are being repaired. A sealed duct system changes the pressure balance in a house, and a filter cabinet or humidifier tied into the return needs to be checked and reset alongside the repair. We know how those units mount, where they draw, and what a leaking filter housing does to the rest of the system.
On the cleaning and capture side, our work runs on Rotobrush and Nikro mechanical systems, and we deploy Abatement Technologies air scrubbers on-site to capture particulates while ducts are opened. Whether you have Honeywell or Aprilaire equipment at the return, or any other make, we can help.
Signs You Need Duct Repair & Sealing Right Now
- Rooms that never get comfortable. If one bedroom bakes while the living room stays cold, a disconnected or crushed run is a likely culprit. The system is running fine; the air just isn’t arriving.
- Dust plumes at the registers when the system kicks on. Debris blowing out of a vent usually means the duct interior is loaded and the joints are leaking air past it. It’s a sign worth checking before the season turns.
- A musty or stale smell that won’t clear. Odor that returns after cleaning points to moisture or outside air getting drawn in through a failed seal. Sealing the leak closes the path.
- Energy bills climbing with no change in use. Escaping conditioned air means the system runs longer to hit the same temperature. That shows up on the bill before it shows up anywhere else.
- Visible damage at the duct or register boot. Torn flex, separated collars, crushed runs, or tape peeling away are all things you can see yourself. If you spot one, it’s worth having the rest of the system checked.
Our Duct Repair & Sealing Process – Step by Step
- 1
Walk-through and system check. We start by looking at the whole air pathway, not just the vent in the room you’re worried about. That means the unit, the plenum, accessible trunk runs, and the registers feeding each space.
- 2
Leak and damage assessment. We check joints, seams, collars, and flex runs for separation, crushing, and tear damage, and confirm which leaks are accessible and worth fixing. You get a plain explanation of what we found and what it will take.
- 3
Written estimate, one flat price per system. Before any work starts, you get a written estimate covering the whole job. No per-vent pricing, no figure that grows once the technician is on site.
- 4
Repair and sealing with debris capture in place. We deploy Abatement Technologies air scrubbers to capture dislodged particulates while we work, then reseal with mastic and repair flex and metal runs as needed. Guardsman-grade sanitizing is available as a final step if odor or microbial issues are part of the picture.
- 5
Before-and-after photos and a walkthrough. You see photos of your own ducts, not a stock image, and we walk the finished work with you so you know exactly what changed.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Sheepshead Bay?
A typical duct sealing job in Sheepshead Bay runs $350 – $900 depending on how many accessible joints and runs need work. Flex duct repair on a single failed run usually lands around $150 – $400, while metal duct repair on a trunk line with multiple separated seams runs $300 – $750. Full duct insulation replacement on exposed runs typically falls in the $400 – $1,200 range, and a combined repair-plus-insulation job on a larger house can reach $1,500 or more.

What moves the price is access, not square footage. Ducts behind a finished ceiling or inside a wall cavity cost more to reach than runs in an open basement or attic. The number of separate leaks, the condition of the duct material itself, and whether insulation needs replacing alongside the seal all factor in. One thing that keeps the bill honest: a written estimate that lists exactly what’s being repaired before the technician opens a single joint. The written estimate sets the final price, and the estimate itself is free.
If you’re comparing repair against replacement, or want to know how repair fits with cleaning, our duct repair & sealing page covers the same scope for a neighboring part of the borough. Call (866) 937-8180 for an exact quote on your system.
Duct Repair & Sealing Near Sheepshead Bay – Our Service Area
We work across Sheepshead Bay and the surrounding neighborhoods, including Brighton Beach, Gravesend, Midwood, Marine Park, Mill Basin, Bergen Beach, Flatlands, Bensonhurst, Coney Island, Flatbush, and Kensington. Dispatch runs Sunday through Friday from 7am to 7pm, with same-day availability on many jobs. If you’re nearby and thinking about repair work, our duct repair & sealing page covers what to expect in that part of the area.
Serving Sheepshead Bay, NY – Our Local Coverage Area
We serve Sheepshead Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Sheepshead Bay
Duct repair and sealing is fixing the physical breaks in your duct system and closing the gaps where conditioned air escapes. That covers torn flex runs, separated metal seams, loose collars, and failed tape or sealant at joints. Sealing with mastic creates a lasting bond that tape can’t match. Together they restore the system’s ability to deliver air where it’s supposed to go.
Most residential jobs finish in a single visit of two to five hours, depending on how many leaks and runs need work. A single flex run repair is quick; a full trunk reseal with insulation replacement takes longer. We give you a time estimate with the written quote so you can plan around it.
Most jobs fall between $150 and $1,200 depending on the scope, with single flex repairs at the low end and combined repair-plus-insulation work at the high end. Access is the biggest factor in where your job lands. The written estimate sets the final price. Call (866) 937-8180 for an exact quote, estimates are free.
Yes. We service both Honeywell and Aprilaire filtration and humidity equipment and can advise on how they interact with a duct system that’s just been sealed. A sealed system changes airflow, so filter housings and humidity controls tied into the return deserve a check at the same time. Ask about it when you book.
Same-day service is available on many repair jobs. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We’re closed on Saturday.
Workmanship on duct repair and sealing is backed by our satisfaction guarantee. If a sealed joint or repaired run fails, we come back and make it right. The exact terms are spelled out on your written estimate so there’s no ambiguity later.
Clear access to the furnace, the registers, and any closet or basement where ducts run. That’s the main thing. Move anything fragile away from the work area and note which rooms feel too hot or too cold so the technician can focus there first. You don’t need to do anything to the ducts themselves.
Schedule Your Duct Repair & Sealing Service in Sheepshead Bay Today
Leaking ducts cost you every month they go unsealed. Call (866) 937-8180 for a free, no-obligation estimate on repair and sealing for your Sheepshead Bay home. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system, agreed before work starts, and before-and-after photos of your own ducts when we’re done.
Written by the team at Air Duct Cleaning Sheepshead Bay.